drstil
drstil
Yes but neither with my own mapping nor with the setting of homebridge (index.js line 1419) it works correctly. As you see below my own mapping, it does not matter...
Removed for clarity. [email protected], [email protected].
@AlexxIT Thank you very much for creating and sharing this nice library! =) As also mentioned in your documentation, I'm using a `Bluetooth proxy` (HA Core 2024.3.0, ESP32 with ESPHome...
> Its just works for me. Nothing special, i used random GPIOs. > > ``` > spi: > clk_pin: GPIO14 > miso_pin: GPIO4 > mosi_pin: GPIO2 > > pn532_spi: >...
I also tried with v0.5 but same issue here. I could not easily use ESPHome version of this software, as there is a known issue with `esp-idf` versions prior to...
> The addon works with SLZB-06M connected over network. However documentation was only just updated recently https://github.com/home-assistant/addons/blob/master/openthread_border_router/DOCS.md > > For it to work: > > * You need to select...
> How do you run HA? On both HAOS and Supervised, you should have a bunch of ports like `/dev/ttyS1`? Only HAOS on Raspberry Pi 3+. Here is my device...
> Not reaally sure about this, but do you have advanced mode enabled under your user settings? perhaps that is hiding them in the UI? Yes, I have enabled the...
Do you know how the addon is getting the device list? With which code, so that we could check if there is maybe some kind of setting/restriction?
Any news here? Is there a way to disable/skip device check when 'Network Device' is selected?