DanielJ

Hi all - I've done quite a bit of playing with victor disks with a kryoflux and a greaseweazle - the problem seems to mostly be down to the fact...

@FozzTexx Sorry, only came in at the bottom there prompted by someone over on stardot - I'm interested that you've managed it with the SCP, but it didn't look like...

No, it shouldn't - actually, mine is an F730 now I look closely :D It's actually plugged into a USB3 port, so there shouldn't be any issues there. Any ideas...

Yes, no problem with the drives at all with the greaseweazle software - drives 0 and 1 happily co-exist. I've just tried a few different drives, I can't get below...

0.31 currently On Fri, 3 Dec 2021, 23:42 David Given, ***@***.***> wrote: > What GreaseWeazle firmware do you have, BTW? > > — > You are receiving this because you...

SCP would play nicely with most extant tool chains. IPF is probably a can of worms you don't want to get into! Keir Fraser's disk analyser can convert to that...

Just to note, there's going to be a bit of concerted effort about to take place to make this work with a victor 9000 which used a Xebec S1410 -...

Because people have only just started getting these machines working (up until very recently it was very hard to make floppy images for them), and now we can get them...

@uweseimet SCSI2SD does do quite a bit of SASI, and works where some very early SASI/SCSIesque drives were used (I use one in an SJ Research MDFS, and they've also...

@uweseimet yes - although I'm not sure when my adapters will turn up! The buffers are currently stuck in customs and the cards are somewhere in China. I also strongly...