Darren Poulson
Darren Poulson
> I was able to get it to work. The crystal speed in menuconfig must be 8M because it's the Huvud crystal and NOT the Waveshare one (which was 12M...
Don't suppose you have any left? Would save me getting some more made (I'm in the UK). If not, might be worth closing this issue so you don't get hassled....
Fantastic. Sure, let me know how much and your paypal address and I'll send some money over. Should be able to see my email on my profile, rather than putting...
Will use a rotary encoder sensor on the gear drive, to detect the teeth going past a dual IR beam setup. An arduino will keep track and be able to...
Initial dome control code written. Will try driving the dome normally via API calls, then get position feedback, and work out the code needed to position the dome correctly.
PS Move controller can now be used. Need to add code for dome still
Generator made, electronics needing completion. https://www.youtube.com/watch?v=DFMihFEFnHI
Adafruit Trinket used for controlling motor and heating coil. Test button implemented that fires smoke for 5 seconds. Just need to add i2c option for triggering the effect and make...
commit 0d414c294f22f3405df41a720d847f9470ac5105 will hopefully fix this, needs testing.
+1 to this. I was thinking a create spool icon with the other icons on the filament list screen would be good. Nice quick way to create a new spool.