doom-fr
doom-fr
It will be great to allow measurement of the width of a drawn segment. (but it will be better to get this info with a right click on the segment)
> That's already possible. Right-click on a trace segment, then select "Measure". This is the length, not the width. 
Ah, we really need 0.2.0 ! :wink:
It will be great to allow wildcard in the search. `Enter` key rotate through results (or better have a list when multiple results).
It will be great to search parts on schematic based on their values.
I think that for this issue and that one https://github.com/LibrePCB/LibrePCB/issues/585, a new panel with a listing of placed devices should be added.
Yes, but for example capacitors have different size regarding to capacity, voltage, technology, ... It depends on things that you can see on the schematic, not on the board. So...
This is really a problem. LibrePCB retain bad component and not the updated one. It also produces errors in the BOM. I think this is a bug. > Of course...
Is there a workaround to know which one are good and which one are bad, without manually verify everything (which is a lot of work and a source of errors).
Seems that in fact BOM is ok. But BOM is not in sync with fabrication files which retain bad components.