Damien Mascord

BLE stops scanning - "BLE: Scanning starting failed, status: 0x1"

9

esp-idf v4.3.1 is used as recommended. **Describe the bug** BLE scanning eventually fails after some time, and does not connect to all 4 thermometers. **To Reproduce** Restart BLE2MQTT, have multiple...

Add in TCP MSS and TV values to get through some firewalls

1

Used code found at https://titanwolf.org/Network/Articles/Article?AID=be79a3d2-c2b5-4704-bf60-87462e1726de This code is released under CC BY-SA 4.0, which is compatible with GPLv3 - https://creativecommons.org/2015/10/08/cc-by-sa-4-0-now-one-way-compatible-with-gplv3/ - though not sure how this is handled in GPLv2...

ipq806x: add support for Extreme Networks WS-AP3935i

11

ipq806x: add support for Extreme Networks WS-AP3935i Extreme Networks AP3935i/e - https://www.extremenetworks.com/support/documentation/access-points-ap3935i-e/ SoC: IPQ8068 QYY AT46279K45060I RAM: NANYA 1527 NT5CC256M16DP-DI 515073W0EF 7 TW FLASH: NOR - S25FL256S1 - 32MB NAND...

Unable to parse time for NotBefore (on Linux)

5

Hi, I have installed your module, and have attempted to generate a PFX for Azure AD, but it returned an error as per below: Cheers, Damien ---- ``` PS /home/tusker/dev>...

mpc85xx: add support for Aerohive AP370

15

mpc85xx: add support for Aerohive AP370 This patch adds support for the Aerohive AP370. It includes support for sysupgrade installation of dtb, ramdisk and kernel (nand tar devices only) Specifications:...

mpc85xx: add support for WatchGuard T30-W

29

This patch adds support for the WatchGuard T30-W. Specifications: * SoC: 800Mhz Freescale P1011 e500v2 * RAM: 1 GiB DDR3L, 32-bit, ECC off * Flash: 4MB SPI NOR + 8GB...

ramips: Add support for the TP-Link Deco X20 v3, an AX1800 WiFi 6 "mesh" AP.

19

Hardware: --------- * SoC: MediaTek MT7621AT * RAM: 256MiB * Flash: 128MiB NAND * Ethernet: MT7621AT 2x GbE * WiFi: MT7905DAN/MT7975DN 2.4/5 GHz 2T2R * LEDS: 1x RGB * Buttons:...