Peter Jonas (DL5DLA)
Peter Jonas (DL5DLA)
I did the test with version 2.0.3, but moved today to 2.0.4. The problem stays to be the same.
I tested this behaviour by an simple (adapted) example code from the axp202 library. And it's the same as on the paxcounter code: As soon as the battery voltage drops...
I have contacted the Lilygo support (btw, they were very responsive and tried to help). They sent me a simple test code to deal with the power off interrupt. I...
Thanks for the changes. I installed them, and it seems to work up to now. Meanwhile I assumed that the display freezes, when I re-plug the usb cable, but I...
I observed the initial problem again even with the fix in the dev branch, after I had temporarily flashed another sketch and then went back to the Paxcounter code. As...
Thanks for the proposal. I changed the code accordingly, and after a long press (6s) the unit switches off, but the blue LED is still on. So the hardwired power-off...
I just did the test again now. Following steps done: 1. starting with a working paxcounter (after flashing the testcode and after that paxcounter again) 2. battery out and in...
@cyberman54 > I can't see any difference in the AXP192 inits, after i copy/pasted the settings from the testcode example. It maybe not an initialization issue, but long press IRQ...
Thanks. I will test it, but it will probably take some days.
Test results: - Flashed with new version - Battery out and in again -> not working (unit does not switch off) - connect to USB -> not working - reset...