djdehaan

I use the CCS811 with an ESP8266 (Wemos D1), get perfect values, eg reacting to breathing very quickly. I found out that after WAKE is brought LOW, it needs about...

Attached: [CCS811-library-update-DJ.zip](https://github.com/AKstudios/CCS811-library/files/1078857/CCS811-library-update-DJ.zip) What I also changed is I removed the wire.begin() statement from the lib, so that I can do that myself and assign the right pins.

First I checked if it found the I2C address of the CCS811. Attached .ino does search and found mine only after I connected WAKE to D0 of the Wemos. [I2CScanner.zip](https://github.com/AKstudios/CCS811-library/files/1078939/I2CScanner.zip)

Did you run the I2CScanner script and did it find the CCS811? With what address?

Like xxlukas42 says: reset or power-off/on the device. I found that trick too. Am now looking into a routine that will do an automated hardware reset if the hardware ID...

I get and add the address as follows, and as far as I can see that includes the type (which is 1 with all devices I test with): ``` NimBLEAddress...

Hi h2zero, that is not the case. When I do not use the whitelist (on the Central) and select on the right service advertised by the Server I see reboot...

Hi h2zero, I am using both the EBYTE E73-2G4M08S1CX (based on the nRF52840 chip) and the ESP32 C3 SuperMini . Both chips show the same effect: without extended advertising in...