Arnd

T-Beam V1.2 Mismatch Schematic to PCB - Header U12 Pin 1 5V is connected to USB VBUS0 instead of VSYS

3

The schematic for T-Beam V1.2 does not match the board (PCB). According to the schematic (https://github.com/Xinyuan-LilyGO/LilyGo-LoRa-Series/blob/master/schematic/LilyGo_TBeam_V1.2.pdf) pin 1 of connector U12 (labeled "5V" on the actual board) should be connected...