dikdom
dikdom
... with the possibility of fast data transfer (i.e not taking 15mins to copy an image file to disk).. as a second iteration maybe.
Hello, with the dfu-utils I used the .upd binary what I have downloaded from here (github), without any conversation (I used linux under VirtualBox under win10).
Hello, this is I received last time I flashed a KFF device: ~~~ ~/devel$ dfu-util -a 0 -s 0x08000000 -D KungFuFlash_v1.09.upd dfu-util 0.9 Copyright 2005-2009 Weston Schmidt, Harald Welte and...
Thanks for your reply and thanks for sharing a the doc, I haven't seen it earlier! In the KFF there is only a 8MHz clock (oh, OK, you may have...
Hello, checking the STM32f405RG spec I read a note (DocID022152 Rev 8, page 59): "PC13, PC14, PC15 and PI8 are supplied through the power switch. Since the switch only sinks...
3. I just should have read 2 more lines... :) The note I sent earlier is in the same legend of the table 7 you are referring to.. I can...
Hello, check, if you have 5V between the J1 pin header (if it is shorted then any of its pins) and ground (shield of USB). If you have 5V check...
If you would want to store the eeprom's content on SD then it would be pretty hard (depending on from where it is executed to write to the eeprom...). So...
Maybe using sd2iec-like (same?) commands..
That is sad, I mean this is meant to be a queue. In theory when there is only one process that executes the tasks, then the order of the executions...