dforbush2

Hi @dododododo21 Can you please confirm that if you run wecSim multiple times with phaseSeed =2, and if you run wecSimPCT with phaseSeed = 2, each of those runs are...

hi @riasatmorshed great questions. I'll try to give some more details and suggestions on the use of userDefinedElevation. From our docs: http://wec-sim.github.io/WEC-Sim/main/user/code_structure.html#elevationimport "The user-defined wave surface elevation must be defined...

hi @riasatmorshed does this answer your question?

Hi @samir-miloud I think we may have resolved this via email, I will summarize here for the community: 1) WEC-Sim does not require GDF files: it requires an H5 file...

And a plug here for our "WAMIT Best Practices" discussion, on our newly-enacted discussion board! https://github.com/WEC-Sim/WEC-Sim/discussions/1244

This PR is for merge once full directional spectra is working in all applications cases. It is not currently. I will make another that SHOULD be merged after WEC-Sim Dev...

I have created a function to take in IEC characterizations into WEC-Sim's present wave implementation. It will be a good approximation if the excitation bandwidth is clearly defined, mostly unidirectional,...

This sounds like something similar to our passive yaw implementation, where we look up the appropriate set of BEM coefficients from the present state of the device. In that case...

@TheWaveMaster FYI this is happening, but represents a significant development effort to do this robustly w/in the WEC-Sim code structure. We will keep you posted of progress.

see also the largeXYDisplacement option if the phase offset is the result of large surge/sway displacements. Otherwise, you should have correct phase data from the bodies' layout within the BEM....