dexterbot80
dexterbot80
 Hello, Here is an update for testing PCB . I hope it will work :)
What are the TRIG and / EN pins? Thank you
 Thank you
> It seems to be different from photos on main page. So could be different layout. Controller looks like ok (gd32f130 c6t6?); battery 24V I would start with identifying all...
> Wiring is shown here, as it is lolin s2 connected to 4 boards, with diodes , as you can see on main page of this repo. Additionally you will...
> 1. Yes, there are sketches, I play with this 4wheeler where author of this repo did nice example of 4 wheeler control. > Then you have sketch ESP ppm...
> Hmm scenario like you proposed on diagram (but one thing different, that in fact master connecting with lolin , and then slave connected to master. You know what I...
> Wait… I think that I also mixed things. The pins I marked are for programming… not for uart. Sorry for confusing. Hello @pacraf, I loaded the firmware in both...
> Yes, better start with the test sketch, and get it working. This sketch works on lolin for me. It is just generator of set values for drive. So no...
Thanks @pacraf i have the same error / reboot Shouldn't it also work with arduino UNO? Do I need to make other settings to use Arduino instead of ESP32?