Tomasz Moń

I'd like to fix all the compiler warnings before doing a new release (mostly deprecated functions). Are you by any chance able to help with those?

> I have a Topping USB DAC/Amplifier (MX3) that works well when connected directly to the laptop. When going thru a USB hub, the device is recognized but doesn't play...

> I believe this and #113 are exact duplicates. The URB Function apparently not handled are the same: "0x002a" And both will be fixed when #78 gets implemented. > I...

> When I get back in the lab, I'll try to get you a real hardware capture to go along with a pcap for these. It'll be captured on a...

> > I forgot that you're not capturing the URB at all in these cases. Is there any way for me to get USBPcap to dump out the raw URB...

While the VirtualBox issue mentions that it shouldn't be fixed in VirtualBox, is the actual root cause known? Last time I tried to investigate the issue, I failed to figure...

> Does USBpcap use the upperfilters in some way? Will it affect the behavior of USBpcap if I remove the upperfilters? USBPcap will no longer work if you remove it...

> IMHO one major issue with USBPcap is that the uninstaller doesn't properly uninstall it. The following critical items remain after an uninstall of USBPCap (using Windows remove programs): >...

Using the USBPcap from commandline catures the traffic from all devices connected to the selected root hub. If you want to capture the traffic for a single device, the recommented...

> > When using USBPcap as extcap, you can select the devices to capture on and start/stop the capture from the Wireshark GUI. > > This just doesn't work. At...