Stephan Martin
Stephan Martin
Running a teensy 4,0 here with the 24MHz default clock. Read / send with 500kbps is no problem for me.
adb permission is only once needed, it will stay until you take it away with adb. And @muziker this works for me up to Android 12 with adb. Lowest was...
yes i would also like to turn filters on/off. Could save quite a lot of typing...
the RCA jack PJRAN3X1U03X is only available over digikey for privates in europe: https://octopart.com/search?q=PJRAN3X1U03X Where digikey charges a lot for shipment, so i searched for alternatives and found the single...
thanks for the Alixp Link, 10 is more than enough! Console5 is great, but the shipping and tax cost make it not the first choice here in europe...
Hello, i have a TM1680 board with 11x11 RGB LED´s, its sourced from a "Denver BTL - 350": https://denver.eu/products/audio/speakers/denver-btl-350/c-1024/c-1109/p-4322 any way to help to get the TM1680 supported? There is...
Hello, yes i will help. The TM1680 used is the 52pin version. It´s a dedicated PCB with the TM1680, RGB led´s, some SMD parts and a connector. So far i...
Hello, wow thats a lot from just pictures and a capture! The device still works as it should, but the "sound" from it is not what i expected and therefore...
Hello oh another BTL-350 thats great :-) I plan to use a ESP32 in the end, so there is a bit of RAM and CPU power there if needed. You...
Hello, is the teardown going well? Based on your input on the I2C Addressing i went now a another route, i pulled A0 low to make it match with the...