dalklein

I am appreciating PyEmVue myself. I have the EVSE and I'm able to control it from the python script, and I'm working on calling that from nodered and my solar...

Thanks for supporting and figuring this out! I've been wanting to have an L2 EVSE that integrates with my solar and battery controls, and seeing this (along with $500 utility...

I agree magico, there are various choices. I have relatively complicated automation system using a RPI with IOTstack, talking to the inverters, bms's, solar charge controllers, and commanding various wifi...

I installed an Emporia EVSE a week or two ago. I'm able to use PyEmVue to change the charge speed and enable/disable it. Thanks @magico13 ! It may be an...

Here's a working example for EVSE control. I use a shell script that runs pyemvue in a venv, passing the desired charge current. The py script will turn on the...

'end of noon'? If it's dark out, the micros do consume a small amount of current. In my system with 23 total inverters and the older oval Envoy, m190 /...

@atas80 1db is a message between the battery and vcm, it is not available at the obd port. Study the can wiring layout, and connect to the bus going to...

This could be great for pairs or sets of lines, such as Bollinger bands.

I got mine working in a python 3.12 venv, after installing numpy 1.26.4, and talib 0.4.32 Other errors come up now of course, but talib / numpy might be happy...

Thanks Matt! I also just got it to work by building docker image locally, with chatGPT pointing the way. Now have data coming in again from my Classic 250! I...