dagnall

attachInterrupt(rxPin, onRx, FALLING) results in immediate reset after updating from 2.0.2 to 2.0.3 (and 2.0.4)

8

### Board ESP32 devboard ### Device Description The fault was noted in code that uses a software UART. I have added a number of debug printlns to explore when and...

Add 9 bit code example?

5

Would it be possible to add a simple 9 bit code example please. I am having trouble following how you suggest the Mark and Space can be used in practice...

Solution to ESP8266 wdt issue and "yield()" problem

10

I believe I have a solution to the wdt timer issue and "yield()" problems. I believe that the problems come from the HX711.read function in HX711.cpp. Here, the code does...

Timo, Thanks for your help, and perhaps I can suggest a small contribution. I find that the heading conversions (HDM HDT and HDG) to N2K and then back to 0183...

Attempt at Parse129285

5

Timo. I have been trying to write a simple Parse129285 to extract (just) the origin and destination waypoint numbers and names. But the code crashes with a "_0x401036cf: __stack_chk_fail at...

I am trying to see if IDF 3.0.0 (alpha 3) is usable, and I found these errors that are associated with your library. You may already be aware of them?...

Idiots guide to missing Entitity ID please? Missing Battery SOC

1

Hi, API 1.0.4 (I hope thats the most recent and correct version?) I have manage dto get it "working" But I only have six entity ID visible and none related...

Improvement to allow correct Parsing of VHW STW data for NASA Electromagnetic Log

1

(Edited 2025 to correct mistake where I referenced SOG and not STW/SOW) Unfortunately the NASA Electromagnetic Log sends a VHW that includes a "zero Km/hr STW" Example: $HCVHW,,,,,0.2,N,0,K*5B The standard...

OpenCPN needs to support (generate) PGN's 129283 & 129284 when route is activated.

2

The new N2000 ‘compatibiity’ has added the ability to ‘receive’ N2K in a number of ‘raw’ protocols. However the program is currently horribly inconsistent in how it sends Autopilot Control...

Arduino 2.3.5 - not installing ESP

2

I have just updated to IDE 2.3.5 from 2.3.4 where - after a lot of tests I had managed to get the decoder working - see my comments in https://github.com/dankeboy36/esp-exception-decoder/issues/34#issuecomment-2692811361...