Tom Anschutz

I would also like to see this feature. However, I can see why it makes sense to work on USB folder first. I would think that USB and network share...

I've thought and experimented a bit with this. Here's what I have so far: You can "fake-out" the USB service to perform this function within limits. The steps I took...

If we wanted to make a SMB service, then I think that starting with the USB service would be a good choice. However, the fileshare has some characteristics that USB...

That's a very interesting link. Given this capability really works, I think it makes sense to use GPIO3 (pin 5) for on/off. I've been planning to use GPIO18 (pin 12)...

I've been meaning to look back at this again. I still have seen this error with the revised code. If I read it correctly, the slideshow will stop if the...

Hi Noro999, Here are some "long-winded" instructions... First, shut down the Pi. Then access the SD card from another computer. When you plug it in, it should show up as...

@Noro999 - I'm glad it's working for you. The way this feature works is that it will use the colortemp.sh script to change the color balance or temperature of the...

That looks like a great monitor. Are you planning to put it into a frame, or just use it as-is? I've done both. For the photo frame I put together...

@Noro999 - your idea should work well. If you get the small sensor in the middle of the board behind a hole about the same size and through paper or...

I played around with this, and got it working, like rafik24, on a manual install on top of Buster. This is what I learned: Both ImageMagick and also /usr/bin/file need...