David Carson

Fix tile labels, add sunrise/sunset and report sensor failure

36

This fork has three fixes on it: #279 Report failing sensors. Shows as a general failure in app, also logs failure #247 Make use of ConfiguredName for compatibility values, to...

Add Light Level history/graphing support

4

With this PR now merged to fakegato [Added lux to accessoryType 'custom'](https://github.com/simont77/fakegato-history/pull/128) , this plugin should be able to support Light Level history in the Eve app.

DC Power reported as NaN from Inverters

1

When running the exporter against my sw, I get NaN from the Inverters for DC Power: ``` # HELP sunpower_pvs_inverter_dc_power_watts DC Power # TYPE sunpower_pvs_inverter_dc_power_watts gauge sunpower_pvs_inverter_dc_power_watts{description="Inverter E00122143041619",device_id="E00122143041619",model="AC_Module_Type_E",module_id="",port="",software_version="4.21.3",type="SOLARBRIDGE"} NaN sunpower_pvs_inverter_dc_power_watts{description="Inverter...

Errors with spaces in UPS desc

2

Using this library via [nut_exporter](https://github.com/DRuggeri/nut_exporter), I was getting errors with my UPSs: `ts=2024-03-28T15:25:22.903Z caller=nut_collector.go:131 level=error msg="Failure getting the list of UPS devices" err="error reading response: EOF"` I tracked it down...

HeatPump support

12

Hi, I have a Pentair Heat Pump attached to my system, as well as a Pentair Gas Heater. The way Pentair recommend configuring it is to configure it as Solar....

When a Tempest weather station is configured, the update interval is hard coded to 1 minute as that is the frequency in which it broadcasts weather data on the local...

Failing to read holding registers

1

Hi, Thanks for making your app available. I have both SolarEdge and SunPower solar panels. I found that I can export the data from the SunPower to Prometheus to make...

`amplify init` says 🛑 Forbidden with no explanation

9

### How did you install the Amplify CLI? npm ### If applicable, what version of Node.js are you using? v20.0.0 ### Amplify CLI Version 12.7.0 ### What operating system are...

Unable to update, every time it says "sudo: a password is required"

2

### Current Situation Anything I try to update, I get this error: ``` USER: homebridge DIR: /usr CMD: sudo -E -n npm install -g [email protected] sudo: a password is required...

Setting input.transfer.high/low fails on CP1500PFCLCD but reports OK

8

I was having trouble setting input.transfer.low and high values. Using the script called out here: https://github.com/jimklimov/nut/commit/4be9a31226d9044bfee21fc9eb69929f0ec409bd I found that input.transfer.high only allows values between 136 and 141 and input.transfer.low only...