dabonetn

Could you add teensy lc's to the database? ID 16c0:04d0 Van Ooijen Technische Informatica I added it manually and it works. Thanks.

HDMI cable causing phantom power back to Kawari (large)

21

As you can tell by the reports, I finally had a chance to sit down and test some. I've got 2 micro hdmi to hdmi cables (6' generic) that I...

HDMI noise/glitches when analog cable isn't connected.

7

Kawari large board, on 250425 MB. There are random sparkles on the hdmi output, when HDMI is the only output connected. When both analog and HDMI connected, the HDMI is...

Atari 2600

1

Please add atari2600 as a supported system. Thanks!

Larger play areas on the gb/gbc/and gba

1

Could you add the option for larger play areas on the gb/gbc/and gba. It seems a waste of screen area just to include more of the console art. On my...

Build of Materials.

4

Is there a build of materials with resistor values/sizes, type of sd slot, etc?

Wish List. Change 0-1,! to B,1-9,R B standing for Block mode, R standing for Raw. If B is selected, allow the sdcard2 prompt to ask B,1-9. Or if 1-9 is...

Apple IIc digital interface (1 + 1 bit TTL) using a pc bufferboard??

2

Is it possible to use an Apple //c digital interface with the db9 pc bufferboard? (or the 2e?)

I would love to see mouse support for navigation and selection in emulationstation. Trying to make a dedicated Golden Tee Cab, but I'll have to add another controller to use...

Could you add the ability to keep the swiftlink driver active in easyflash mode, but only allow the d700 address? I've done this before with earlier versions of ccgms and...