d51r3verse
d51r3verse
First of all, thank you for contributing the helper script. I checked there is no same issue reported on here. I've tried 4 times retried then 3 times reproduced. 1st:...
Installed `https://github.com/songchenwen/nanopi-r2s/releases/download/FwF-2020-04-28-29cf7e9/FwF-2020-04-28-29cf7e9-ROM.zip` `opkg list-upgradable | cut -f 1 -d ' ' | xargs opkg upgrade` then reboot, ``` Press the [f] key and hit [enter] to enter failsafe mode Press...
Debian 4.19.98-1 (2020-01-26) x86_64 GNU/Linux with latest(https://github.com/widora/openwrt_widora/commit/60832d43c35ef509fa4dcdef6c214b035a0f724c) commit, /w glibc ``` Argument "4.2.1" isn't numeric in numeric ge (>=) at ./scripts/feeds line 25. Argument "4.2.1" isn't numeric in numeric ge...
I changed partitioning, re-probe through manual eject/insert... But script still depends `ext4` commands. If you have any time, I would hope to see `etcher` compatible images in next releases. Also...
V1.7.1 Unpopulated SMD * C25(GPIO36-GPIO27), C26(GPIO39-GPIO38) * R22 on RED(Power) LED I wish to know how about yours one?
#In U-Boot 1.1.3 (Jul 13 2019 - 11:44:56) MT7628 # setenv bootdelay 9
Weired out-of-order(sequence and/or voice sequence, duplicated) packets when I receive IPSC2 reflector response. -Especially IPSC2 reflector response only. -I tested three IPSC2 servers: same results -Tested different network(leased 1G, 3G...
https://github.com/qrp73/NanoVNA-Q/issues/16 Same issue appeared latest(f6f948b) NanoVNA-H too. I using "empty `trace`" command for identify current trace status and scale in my script. But it will hung occasionally. I found the...
I read about TAPR-VNA from NanoVNA groups. Any chance for my bulky JTGP-1033 aka D6 ( ADF3451 * 2, IAM81008 * 3 ) controlled by TAPR-VNA? General informations about D6...
1) I think Transform must be off when CW sweep or CW sweep can not selectable when Transform ON. 2) VF can be entered over 100( Scale was % right?...