Mitch Bailey

a21o_4  o21a_4  a21bo_4  a211o_4 

@mousaq92 For LVS, what I've been doing is using the spice representation of the standard cells instead of the cdl.

Similar to #305.

For running device level LVS and CVC on other projects on the MPW (assuming `user_project_wrapper` is the only difference). 1. cd _project_ 2. Uncompress `gds/user_project_wrapper.gds` 2. Recursively check for referenced...

@RTimothyEdwards Working with a more recent version of magic, eliminated the need for SUBCUT around the io pads. So currently there are 3->4 types of changes to the io pads...

I'm proposing layout changes to the following cells, ``` sky130_fd_io__res250only_small sky130_fd_io__signal_5_sym_hv_local_5term sky130_fd_io__gnd2gnd_sub_dnwl sky130_fd_io__gnd2gnd_120x2_lv_isosub sky130_ef_io__vssio_hvc_clamped_pad sky130_ef_io__vddio_hvc_clamped_pad ``` The addition of met3/short layers at the parent hierarchy in the clamped_pad cells will...

@RTimothyEdwards I made an open_pdks PR for the netlist changes. Probably take a day or two to figure out where the original layout changes need to be made. To pass...

@RTimothyEdwards The layout changes aren't going to be as simple as I'd hoped. The following cells have mag files with gds links, so I assume they're generated from gds. ```...

@RTimothyEdwards We're getting closer, but I don't think we're quite on the same page yet. My ultimate goal is to be able to run LVS on the caravel/cararvan gds -...

Here are the changes I propose. 1. `sky130_fd_io__gnd2gnd_120x2_lv_isosub` Change DIODE `81/23` layer before after removing DIODE `81/23` from `sky130_fd_io__gnd2gnd_120x2_lv_isosub` and copying diff `65/20` to `81/23` in `sky130_fd_io__gnd2gnd_sub_dnwl` 2. `sky130_fd_io__res250only_small` Remove...