Nathan Fain

Issue is when there are two tags with the same name. tag_get() only returns one of them and in some cases, depending on tag "freshness" (when it was last used,...

Could you run the bash script with -x so we can figure out which command is segfaulting. ``bash -x ./JTAGenum.sh``

I'm sorry to say that beyond the information that is in the readme and in the wiki I'm not able to give much more advice. Whenever I use JTAGenum I...

Not at the moment. Wouldn't be too difficult to add support for this but I sadly have not had the opportunity. You can try this which has swd support: https://github.com/szymonh/SWDscan

It sounds like you've tried everything I would have tried. I've detected FPGA's before with JTAGEnum. So I'm not sure what could be the issue. If you are able to...

Would this board from Ebay with a XCS200 be comprable? https://www.ebay.de/itm/XILINX-SPARTAN-3-XC3S200-FPGA-module-FPGA-kit-Development-board-XMF3/182243053522?hash=item2a6e884fd2:g:ZZwAAOSwawpXsH4A If so I wonder what the significance of the description: " • 2.5V (VCCAUX, JTAG)" There could be an...

Yes, I think so. If Teensy 4.0 has support in Teensyduino then it will work without or with very little modification to JTAGenum. I see on the [Teensy 4 release...

This board looks very welcoming to RE. Have you checked if you can find a footprint for the MCU. Because there are so many traces you may be able to...

I finally had a chance to look at this. On the first setion, pattern scan: There are too many FOUND results. Even after I remove the results that could have...

Sorry for the delay. It depends. A true loopback would showup as something like ``FOUND! tdo:A8 tdi:A2 reglen:0``. The loopback tests by running the normal pattern scan where it shifts...