curlyel

I basically agree to Kaspars 's thought - at least I feel the same pain ;-) For me this boils down to the question, **how to organize points for equipment...

Just for reference: I've done a tiny workaround which solved the "long list of points" problem while leverageing yet-existing features: https://community.openhab.org/t/mainui-better-rendering-of-equipment-with-lots-of-points/115860?u=curlyel This is a bit of work - sure. Therefore,...

Same issue here. Just the basic parameters as listed by @gr0mit1 for the Smart-UPS C1500. Has there been some progress in supporting it?

I'm still not having a working solution which provides me more than the very basic information from my UPS. The only software I've tried so far which provides the internal...

Thanks @clepple for looking into it! > is to see what `lsusb -vvv -d 051d:` returns O.k. that's an easy one: ``` # lsusb -vvv -d 051d: Bus 004 Device...

> enable the Modbus communication functionality, in the front control console of the UPS, go to Advanced Menu mode Yes, I found this paper too. Unfortunately, my UPS does not...

The newer SMC1500I models with "Cloud Connect" seem to have the config option on front panel for modbus _although_ having the limited symbol/numeric display. _And:_ Not necessary to enable anymore....

Thanks @zewelor for your quick reply! > visible in OS like any other bluetooth adapters Unfortunately, this seems not to be the case. The `BlueGiga` have the **complete Bluetooth software...

Understood. Thanks for pointing this out ;-) I started searching, if _(or how)_ `bluepy `is interfacing with BlueGiga's. So I stumbled over `btlewrap`: > **btlewrap** > Bluetooth LowEnergy wrapper for...

> change bluepy imports to something like: > > `from btlewrap.pygatt import PygattBackend` Yes. That's what I was hoping to hear ;-) Thanks. I'm going to try this out when...