Bill Waggoner

I discovered that the uptime message is variable length depending on how long it has been since a system restart. My current uptime reads: 23:09pm up 2:04, 3 users, load...

I tried imaging the latest release but when I tried booting on my Zero 2 W all I get is the color splash screen. I also tried cloning the project...

Flex temp ranges

1

I built the Thermal Camera and want to present this enhancement. It starts with the suggested temperature range but then applies a moving average to the high and low range...

Error making - code model kernel does not support PIC mode

4

When attempting to make the module I get: ``` make -C /lib/modules/4.15.0-20-generic/build M=/home/bill/Projects/intel_nuc_led modules make[1]: Entering directory '/usr/src/linux-headers-4.15.0-20-generic' CC [M] /home/bill/Projects/intel_nuc_led/nuc_led.o cc1: error: code model kernel does not support PIC...

Upgrade to 0.5.1 caused disassociation of all Insteon devices

3

**Describe The Bug:** When I upgraded to 0.5.1 all of the associations (Rooms, Scenes, Automations) of the Insteon devices were lost. Luckily I had gathered that info prior to the...

UIKit Dependency? Not suitable for MacOS

1

I would like to use this on MacOS but it has a UIKit dependency Hmmm, maybe Fusion? I've never worked in that though ... Thoughts?

Doesn't handle Slic3r gcode

1

Two initial problems with trying to process gcode output from Slic3r: 1. The **G21** code is rejected (can be ignored) 2. Doesn't complete preprocessing (due to no Cura profile?) and...