cstaton-ftlg

I do not need help with this as I was able to get tesseract installed bypassing the need for sw by using this binary https://github.com/UB-Mannheim/tesseract/wiki

I can't get zoom to work on Canon PowerShot G7x MkIII This: `gphoto2 --set-config Zoom=10 --wait-event=5s --trigger-capture --wait-event-and-download=2s` immediately prints this: ``` *** Error *** The property 'Zoom' / 0xd055...

Hello, Firstly Thank you for this awesome project, it has opened many doors for me! Secondly, I would like to bring to your attention a few issues with the [SKR...

I have figured out how to compile firmware independent of the web builder and I am currently testing the modifications I mentioned.

Hello, I have finished testing changes, seems like everything works, and my modified btt_skr_pico_10_map.h file is attached. I ran into a couple of other issues and "fixed" what I could...

> Do not delete these - they are there to fail compilation if more than 4 axes (or 4 motors, see below) is configured I realized that as I dug...

> > Since TRINAMIC_ENABLE is already set in the board map, then I think TRINAMIC_MIXED_DRIVERS should be set automatically in driver.h > > It is but it is set to...