cspacone

I forgot to say thank you for looking and providing such an easy to use CAD system!

Matt, I’ve attached a fairly representative diagram. I’ve also attached the Excel spreadsheet that I use to track the wire numbers. I appreciate your help and recognize that this is...

Matt, Looks like Git strips attachments and overwrites email addresses with asterisks. Can you send me your email direct? Cspacone at socal dot rr dot com -Chris From: matt123p ***@***.***>...

[20211103 Remote 3 & 4 Spacone Markup for As-Built.pdf](https://github.com/matt123p/TinyCAD/files/7508338/20211103.Remote.3.4.Spacone.Markup.for.As-Built.pdf [20211108 WIRELIST.xlsx](https://github.com/matt123p/TinyCAD/files/7508340/20211108.WIRELIST.xlsx) ) Here are the files I was referring to. -Chris

Building a Vans?

+1 I note there is an XML file in the directory from which I run the program. Does this indicate that there is a line that can be entered to...

RWTCS: I have exactly the same results as you. Lilygo T-Beam see picture for board model, by SMA connector. I'd love to help, but I'll need to study the template...

So I found a schematic as well as some of .INO code (Ardunio IDE I'm guessing). Determined that the serial port is sending and listening on the USB connector (115200,...

I pulled the sticker off the loRA module and discovered that it is made by HDPTeK and is a model HPD 14A V1.2 and appears to incorporate a Semtech SX1278...

> ... and the flashing red LED near the GPS antenna, while it can take a LONG time to activate, seems to indicate when the unit has acquired enough GPS...