Crowbar Z

I believe `varmqtttopic` and `varmessage` are the _Tasker variable names_ that the MQTT topic and payload are respectively set to when a message with the selected MQTT topic is received...

Yes, you need to put some Tasker variable names in the `varmqtttopic` and `varmqttmessage` fields when you set the event up, but my point is that you don't have to...

#38 fixes it for me too, thanks @bfayers, @shenxn and others that helped figure out the solution! In case this helps others, rather than patch by hand I upgrade-installed the...

There was a change with the way colours are handled in esphome a few revisions ago, I remember having to change my config to define the colours like this and...

I tried to fix this in #13 by updating the `color.to_rgb_565()` call per esphome/esphome#1551. It turns out though that the m5stickC plus that I have uses a st7789v2 screen and...

I was thinking yesterday that there is a need for `Zones.All` or `Zones.None` to cover commands for attributes that are independent of zones. That could also be used in the...

In #35 I've added HA `DataCoordinator`s for each zone to trigger zone entity refreshes via a callback from aiopioneer. The HA `media_player` entity attaches to that, as do the new...

This integration is unlikely to support your model of Pioneer AVR. The manual that I found online for your model of AVR is dated 2021, so it probably uses a...

> Does anyone has the VSX-932 successfully setup? I can't connect with port 23 nor 8102 Try power cycling the AVR, especially if you have previously used the core pioneer...

@jasongabler you mentioned earlier that your VSX-LX503 _is_ controllable using https://github.com/miracle2k/onkyo-eiscp ? Unfortunately this integration doesn't implement the protocol used by that repo - from a quick scan of [the...