cristipurdel
cristipurdel
**Is your feature request related to a problem? Please describe.** Sometimes I am running additional script, and it interferes in terms of speed with the other, making it really slow...
Since a couple of weeks (before it worked for 30 days without an issue) it stopped working and I am getting the title error. After I ran the tplink-monitor-win0.8.exe and...
First of all, thank you for your soft. I have it set up with two 80W panels, and I am trying to measure the "production" rate. It would be helpful...
As per title.
## Feature request It would be nice to have support for itertools, e.g. product: I am trying to do following code with some constraints: temp = itertools.product(range(4), repeat=50) If the...
**Describe the bug** Stationary device mode not available on Samsung J7V but is available on Samsung GS5 NEO. Min battery level is 10%, so I cannot use it with Samsung...
Would be nice to have a metallic plastic buckling as follows: - in the buckling section, would add a true/false button, which should be taken into account only if: Ex...
In the laminate area, append Failure Criterion 2 after Failure Criterion. Also add a scaling factor as percentage so that Failure1 is calculated at full loads (Ultimate Load for fiber),...
Would be nice to add the stiffener based on composite laminate. Reason would be to add a composite stiffener to simulate a composite column buckling analysis.
Would be nice to add HSB 45910-01A full equations 3-23 ... 3.25, with default curvature being infinite,