craigwitter

It definitely seems slower at creating the sensors then previously, I also note that I'm missing data for a few that were previously there > Feels Like, Wind Direction Average,...

Thanks for the quick response! On Fri, Jan 5, 2024, 12:46 PM Nathan Spencer ***@***.***> wrote: > @craigwitter your Tempest is in power > mode 2 > > which explains...

Hasos 2024.5.1 here. Thanks, Craig On Sun, May 5, 2024, 4:13 PM Koen Kanters ***@***.***> wrote: > What home assistant version are you using? Make sure to use at least...

@Koenkk does this help? https://github.com/home-assistant/core/issues/116914

On my bluetooth proxy, I added active: true under bluetooth_proxy: and it the Wave+ was detected right away.

Here is the total config for my POE bt proxy That being said, it's line 42 that I added the active line. -- ``` substitutions: name: "utility-bt-proxy" esphome: name: ${name}...

substitutions: name: "utility-bt-proxy" esphome: name: ${name} name_add_mac_suffix: true project: name: esphome.bluetooth-proxy version: "1.0" esp32: board: esp32-poe-iso framework: type: arduino ethernet: type: LAN8720 mdc_pin: GPIO23 mdio_pin: GPIO18 clk_mode: GPIO17_OUT phy_addr: 0...

No, homeassistant removed the error as it was causing a lot of unnecessary confusion. On Sat, Sep 2, 2023, 5:32 PM TopBanana123 ***@***.***> wrote: > Is this fixed? Because I...

Assuming you're using HomeAssistant, you should be able to make a template sensor for this in the meantime. It looks like the status entity updates frequently. Here's an example that...

I also see > 2023-11-10 08:36:32.347 DEBUG (MainThread) [homeassistant.components.mqtt.update] Non-dictionary JSON payload detected after processing payload '33685764' on topic zigbee2mqtt/Master Bedroom Fan In the MQTT Debug log