Cooper Pellaton
Cooper Pellaton
@tillycatcat if you look in the 3D print where the camera module should go there are 2 struts that support the upper ring. If, looking head one, you remove the...
@grantland I used [this](https://www.waveshare.com/raspberry-pi-zero-v1.3-camera-cable.htm) cable and had no problems with it being too long. It did, however, have to bent in order for it to fit into the printed recess.
I punctured one cable when bending but that was due to applying too much force with a pair of tweezers. I think as long as you don't overly force it...
@austriker27 I'd be open to doing it, however, I'd caution you that the cost will likely be prohibitively expensive. Do feel free to email me.
@austriker27 see my website linked in my bio.
I tried installing the camera today. Clearance is _really_ snug. Managed to break one of the SMDs near the cable mounting point which subsequently broke the camera. I ordered the...
I have some free time and I'd love to help; please let me know what I can do!
@khamidou I am not self-hosting the sync server. I am using your hosted version through the `N1` client. Something to keep in mind, my FastMail email address has two domains...
@grinich I don't use any other services to access that FastMail account but can do some testing if desired.
I use a (very recent) commit that still has the binaries present: ```yaml repos: - repo: https://github.com/kamadorueda/alejandra rev: e53c2c6 hooks: # Requires Nix to be previously installed in the system...