btechnet
btechnet
@trampas Can you review this?
@tramps can you provide schematic and pcb libraries from Altium to the source?
Please post your board.h file
@trampas, Can you update the docs to reflect the latest changes in hardware?
This bug is confirmed. Will test new code
@billydragon I will check into this and see what changed.
@billydragon It appears that you are using the defines for the mechaduino. The pin definitions have not changed from 0.38 to 0.40. It appears the BTT S42A is using pin...
@billydragon I need to confirm the changes with BTT and add that to FW 0.40. Nothing needs to be done on your part.
@billydragon, I have attached a new board.h file. Please use the latest 0.40 FW, and overwrite with this attachment. [board.zip](https://github.com/Misfittech/nano_stepper/files/4042466/board.zip)
@trampas, the docs state that the board needs 5v at VIN. With the new on-board 5v regulator is that needed anymore? The buffered pins are all pullup, not sure if...