code8buster
code8buster
Greetings, I've been trying to make the Chilipeppr probing routines work for me for the longest time and only recently have made some progress on it. After many failed attempts...
There is at least one board in the protobufs with two SPI Ebyte modules on board, selectable via CS/NSS pin. (disasterradio v3 DR_DEV) Currently, there is no way to use...
I am experiencing a severe reduction in feedrate proportional to the length of linear G-code vectors. It was demonstrating this behavior on commit c0ae8e5 of the development branch, but still...
Stepper current control is overriden by motor current percentage even if motherboard = 301 (RAMBo) is set and the percentage settings are commented. Had to workaround by setting motor current...
**Sketch that is causing the module fail** ```c++ #include // SX1262 has the following connections: // NSS pin: 33 // DIO1 pin: 27 // NRST pin: NC // BUSY pin:...
This is low priority, maybe it is interesting to have some customize ability with compression? For instance, maybe you don't want almost uncompressed zstd level 1 but are too impatient...
cryptdevice parameter is not dropped when doing a "standard" type installation egg was produced from an encrypted-root Arch Linux, so it's just carrying the parameter over. It was necessary for...
When installing from an egg produced with the --release switch, eggs krill only removes calamares from the installed system and not penguins-eggs. version: 9.6.36
- **App Name:** Plasma 6 - **Icon Name:** network-wired-activated-locked - **Description:** Exists in breeze default themes for when you have a VPN connection on wired internet - **Webpage (optional):** N/A...