Chris Merck
Chris Merck
@matt-knight Regarding bandwidth, keep in mind many users have low-cost crystals (HopeRF modules) which may fail to communicate at minimum bandwidth due to frequency error. I'm unsure of the distribution...
please check upstream, i don't maintain this lib On Tue, Jan 21, 2020 at 8:45 PM samminen wrote: > I see this issue with demo/LINUXTCP application. > > — >...
> Make strict mode the default / RFC-8259 Non-strict mode is important to the extent that JSON implementations differ in the wild (or, at least, to the extent that the...
Indeed we now support SetPosition on most shades, both on Bond Bridge Pro and Bond Bridge. This is done by dead-reckoning if the shade technology doesn't have a discrete signal...
Why "Tuya" in the logs?
FWIW, on the Bond Bridge Pro, we support SetPosition for Somfy RTS shades. It works by deadreckoning with a Kalman filter and a little planning algorithm to avoid the pitfalls...
Yes! Though to be clear the Somfy RTS position control is only available on the BD-1750-PRO model, not the BD-1000 model.
> how do you figure out what model shades you have? Indeed that can be a hard problem. Sometimes the motors don't even have model numbers printed on them. But,...
We don't support Blinds officially, just Shades. Blinds usually work for open/close (some Blinds don't work for open/close because they overshoot the open position). SetPosition may do something, but YMMV....
Any Somfy RTS shade/blind product that works with Open/Close/Stop type remote controls should work with SetPosition also.