chmondkind

@beyonlo ugfx was used years ago with uPython https://github.com/SHA2017-badge/micropython-esp32/tree/6756a75ba07d5dcf1e69d5cd70f491950b5561f1/esp32 The wrapper didn‘t reach a complete, stable release, but it did work apparently.

Sorry mate - this fork, the one that is „the“ fork for Espressif‘s MCU‘s is dead. I don’t give Boris any fault for this, obviously one has an income during...

Hi realfrogman - If it isn’t there are viable alternatives working on K210 boards. I‘ve ordered one to test its automated visual inspection capabilities. It has been done on this...

Thank you, Matt! > Am 10.11.2019 um 23:40 schrieb Matt Trentini : > >  > Some progress is being made (though perhaps never as fast as we'd like!): _thread...

I still use this port for anything with Neopixels. The RMT usage is an issue - perhaps. But on the other hand: The HSB/HSL routines, addressing of the pixels -...

> I still use this port for anything with Neopixels. The RMT usage is an issue - perhaps. But on the other hand: The HSB/HSL routines, addressing of the pixels...

> > I still use this port for anything with Neopixels. The RMT usage is an issue - perhaps. But on the other hand: The HSB/HSL routines, addressing of the...

Great advice Bill! increasing the stack size is what solved my issues with using threads (one of the main reasons I started using this fork of uP in the first...

If you want to use uP on ESP32, be sure to buy a module that suits your needs. I decide like this (most of my projects are about data aquisition,...

Had issues with my NanoPi Air (H3). There was a OpenSSH private key in it (a fact I don't understand). After it the following entries where in it: `rootdev=UUID=fc6d1d22-a58c-4f4b-89fd-b91068648fa3 rootfstype=ext4...