haliluya
haliluya
Same issues builder: Ubuntu 22.04 HW: x86_64 Target：arm64 make -j8 make[3] -C package/utils/f2fs-tools clean-build make[3] -C package/utils/f2fs-tools compile make[3] -C feeds/store/luci/taskd compile make[3] -C package/istoreos-files compile make[3] -C package/system/fstools clean-build...
It seems that everything is normal~but the system is not accessible and the device does not respond
But I access the device through a serial connection, not through the network Use a serial connection to gain access to the console Now the serial console also crashes, and...
Normally, even if there is no network card or the network card is not started, the serial console access will not be affected
> Normally, even if there is no network card or the network card is not started, the serial console access will not be affected Thank you very much for your...
Is it possible that the CPU frequency setting problem caused the system to crash when entering the system?
I have repeatedly tested for 3 times by referring to the build link. Unfortunately, the compiled system cannot enter and crash each time...: (
The sbc is customized by us. On the Armbian image（Armbian 22.08 Bullseye）, everything is normal. It can be started normally and enter the system interface it use /dev/ttyS0
Armbian Espressobin It is a reference platform for us We use this for reference to build our target platform is mvebu64
> > The sbc is customized by us. > > Which Armbian image do you use then, or which target platform, if you used the Armbian image builder? > >...