cefiar
cefiar
Specifically around: Pins between +5V and VIN Thermistors and End Stops.
The tracks around the hole near Pin 21 are a little close to the hole edge. In theory, this could cause issues with mounting, or issues with operation if the...
Can we implement thermistor protection, as has been implemented in RAMBo v1.2? Given that the circuitry was based on the thread that bobc/nophead & myself all participated in, I don't...
Would it be possible to use a slightly larger size resistor pack? They're very finicky to solder into place if you're doing a one-off run, and even with paste/oven, bridging...
Replace the ESTOP 2 pin header with a locking connector like P901, P902 and P105. I wouldn't want the ESTOP connector falling off during a job! Note: I've populated mine...
I've noticed the following behaviour when adjusting the slider on the bargraph at certain levels of zoom when there are a lot of bars. 1. Zoom in a fair amount...
While I know you can adjust the zoom using the - and + on either side of the scroll bar under bargraph, the ability to zoom all the way out...
Got a trace I'm looking at (for fd.o bug https://bugs.freedesktop.org/show_bug.cgi?id=101408 FYI) that fails to give any details for a frame (no metrics, shaders, uniforms, etc, and no render): Trace: https://drive.google.com/file/d/1zLOabG3Ob9yzvdjgMT_E4tnDJVJrLniT/view...
Since #17 was implemented in https://github.com/janesma/apitrace/commit/4267571c04f7de3bc9645a243b46d11f526a06c0, there is currently no way to know what frame you're looking at when inspecting a render. While there are plans to add swapbuffer colors...