Carlo Comincini

> s root fixed this issue for me. > After running the command there was a file `/etc/apt/sources.list.d/nodesource.list`. I solved the same problem with the same solution Thanks a lot...

Hi @Chris13-Dub, please take a look at the screen and see if there are errors concerning _**Library not loaded: /usr/local/opt/libpng/lib/libpng16.16.dylib**_ If so, here you can find a solution: [https://forum.duet3d.com/topic/11445/flashing-firmware-on-mac-os-x/2](https://forum.duet3d.com/topic/11445/flashing-firmware-on-mac-os-x/2)

Hi, thank you for sharing this wonderful work. I've tried to open the Hictop D3 Hero.HMI file but the editor refuses to open it. Neither the Chinese TJC nor the...

Yes but the HMI file must be opened with the Chinese version of the editor. The HMI nextion editor refuses to open the Hictop HMI file but it opens the...

Hey @klack, I had some difficulty too in understanding that. Thank-you. On mine Tenlog D3 Pro, when I have selected the second extruder as the active one, if I home...

> I still have this issue too. I have to issue T0 command before homing. Hi Klack, I've found a lot of discussion on this function that put newly selected...

@klack I'm unable to correctly set the x offset of the 2 titan extruders on my tenlog d3 pro. Can you suggest me how to proceed?