Cameron Unterberger

> > Flipper crashes, screen blank, buttons unresponsive (requires repair with qFlipper) > > Even LEFT+BACK doesn't work? https://docs.flipperzero.one/basics/control#ih-reboot LEFT+BACK did work, thank you. I wasn't aware of that feature.

> Can you provide us .sub file? Please forgive me, I'm new to hardware and RF (coming from software dev background, was hoping to use the Flipper as a way...

> so let's start with the fact that who said that SUBARU is a supported protocol, secondly CAME TWEEN is not like SUBARU I wasn't sure whether it knew the...

>  Manchester encoding, symbol rate 1000 data in your record 0x8881C2BAEFBFC76 0x8881C2BAEFBFC65 0x8881C2BAEFBFC54 0x8881C2BAEFBFC43 0x8881C2BAEFBFC32 you can see how the counter is decrementing need more entries. namely, 5+ clicks...

Here is a capture (using `candump`) of what "good" OBD2 traffic should look like when requesting a VIN (Service 09, PID 02): ``` vcan0 7DF [8] 02 09 02 00...

I talked to the author of the `can-isotp` Linux kernel module, and he confirmed that the OBD2 request message should be sent as a broadcast message in a single CAN...

[This blog post](https://shayanmukhtar.com/2020/10/26/uds-protocol/) suggests that the Service IDs I mentioned are part of the newest (2020) revision to the UDS standard.

@Skorpionm how did you get to view the .sub file's data in the Saleae Logic program? I thought I could [write a parser](https://gist.github.com/camercu/e5805cdedf176927b0c64147991121d1) that converts .sub files to the Logic2...

Adding a note about extended addressing for whenever we can get around to fixing this issue. If using 29-bit (extended) addresses instead of the typical 11-bit addressing, the broadcast ID...

I'm interested in having a reader as well. I just stumbled across native Javascript API that can do it, but the browser support is limited. https://developer.mozilla.org/en-US/docs/Web/API/Barcode_Detection_API