calvfoo

hi, i tried with the latest Arduino 1.8.15, and the stickbreaker fork (from 2018?), and seems not working on ESP32. Compiling with wire.transact is ok (means the fork was installed...

error msg 20:36:20.182 -> Rebooting... 20:36:20.182 -> ets Jun 8 2016 00:22:57 20:36:20.182 -> 20:36:20.182 -> rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) 20:36:20.229 -> configsip: 0, SPIWP:0xee 20:36:20.229 -> clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 20:36:20.229 -> mode:DIO,...

ok, got it working with codes from here https://github.com/Samox1/ESP_Thermal_Camera_WebServer use Arduino IDE standard ESP32 board bought a simple MLX90640 board from Aliexpress

ok, got it working with codes from here https://github.com/Samox1/ESP_Thermal_Camera_WebServer use Arduino IDE standard ESP32 board MLX90640 board from here ....