Benjamin Vernoux
Benjamin Vernoux
Start hydrafw then type: ``` uart 0xFF 0 1 0x80 0x55 0xAA 0xFF 0x11:4 0x11 0x22 0x33 0x44 0x55 0x66 ``` - "up key then Enter to repeat last line...
Could you add the amazing Dear ImGui in demo ? https://github.com/ocornut/imgui
Add a "graph" management toolbar (this tool bar can be hidden) with icons to do following stuff: * **1** - Horizontal Zoom * Zooms the entire graph in the horizontal...
Remove the usage of Python to build the version (from GitHub Tag) and build DFU for STM32F405 => https://github.com/hydrabus/hydrafw/tree/master/src/build-scripts 1) Remove hydrafw-revision.py / hydrafw-version.py - To be done with GitHub...
Today Via Fence Generator use fixed values for Via Drill & Via Size It will be great to use KiCad "Via Drill / Via Size drop down" list of values...
It will be a very nice feature to display BIN(Bits) and HEX (each 4 bits) in bottom of the IQ waveforms in "Time Preview" See a picture step 4 BIN/HEX...
It will be a very nice feature to display BIN(Bits) and HEX (each 4 bits) in threshold plot Spoiler it is the solution of Hardwear.IO 2021 CTS Signal3 (ASK OOK)...
I think very nice improvements for a future version will be: - To replace the Spartan6 to ECP5/ECP5-5G and use open source tools - Add Ethernet with SCPI standard commands...
https://github.com/eez-open/modular-psu/tree/master/mcu/KiCad are obsolete they use EEZ DIB MCU r1B2 when official latest version (Eagle files) is EEZ DIB MCU r1B6 It will be great to add details in the [mcu/README.md](https://github.com/eez-open/modular-psu/blob/master/mcu/README.md)...
I have seen selected MCU is an STM32F769IGT (LQFP176) which is very good anyway I think for future and to manage even more things it will be a must have...