Brian Taylor
Brian Taylor
You can write a bash script to parse the end of the device log. If it stops changing, trigger a push to telegram. Adding onto that, if the temp is...
Having the same issues and it is crashing my network. About 50% of my ZY-M100-L are joining as S_1 devices and reporting every second. Next steps: remove all the S_1...
Has anyone tried the new 24Ghz in ceiling zigbee models to see if they have the same problem?
Anyone able to find any guides on dumping the firmware and modifying it? I have a ton of these devices. At the same time, I ordered a 24Ghz model (MTG235-ZB-RL)...
Additionally, the 24Ghz model moved the re-pairing button to the front of the unit so that it is not required to pull the unit out of the ceiling and risk...
Even when presence is detected, the messages from this new model are much less frequent. I don't see any impact on accuracy. While it has only been installed for 12...
``` CT1-CT3 on the main board, and CT1-CT3 on the add-on board will be in phase with the 1st phase CT3-CT4 on the main board with the 2nd phase CT3-CT4...
Updated the esphome and the CC2652 firmwares. Still crashing daily unfortunately.
Thanks.