brimur
brimur
Hi @Jorman, I used your script and was able to create a connection to PIA, I am getting an IP but I think I did something wrong. I cant route...
Thanks. I solved my issue. :)
Hi guys, I'm also using this driver on a DS1815+. Thanks very much @bb-qq for the driver. I thought a couple of the QNAP devices ( qna-uc5g1t ) might breath...
Just wanted to add some iperf3 stats. When the DS1815+ is the server I get weird results. When the DS1815+ is the client things seem better. Below is the results...
Thanks, I mentioned in my post above that I tested with 2 x Win10 machines and they had solid connections and I was able to transfer ~400MBs. When I connect...
I installed the HTML5 speed test and ran some speed tests. The picture below compares my LAN connection to the DS1815+ with the AQC11 connection. The HTML5 speedtests show ~1Gbit...
It was a single 8GB ISO file used for both file copies. The source Windows 10 machine only has a single 1Gb NIC anyway so would not benefit from the...
Thanks for all the suggestions. I had file services set to SMB3 and SMB2 with Large MTU. As mentioned it's fine when I go over my local network, the 1Gb...
> @brimur - did you get anywhere with this? > > I’m getting very similar issues: #43 No I gave up on it, yours is a newer synology so you...
> > Also this driver cannot be installed on the new DSM 7 > > Why is that? I read they were removing some drivers, but surprised if missing drivers...