Peter Misenko
Peter Misenko
Hi, It is look more like power supply problem ... switch is in battery position and battery is not installed. Check if you have stable 3.3V
I am sorry, no.
I start work on, I is question few lines.
@richteel thanks you made lot of professional changes, I have try run on my board but I wan unable to solve all dependencies, can you please upload all required files?...
I get problem with PlatformDetect, then I remove this lines, I gen another error, then it was mounted in read only and it was end
sorry, sorry, I was mistaken, very similar names (richteel/rgrizzel ) I tested https://github.com/rgrizzell/Armachat-circuitpython
delete all files from device and copy fresh from here https://github.com/bobricius/Armachat-circuitpython/tree/main/Software
THANKS, ALSO MY BEST RESOURCES FOR LEARNING CIRCUITPYTHON !!!!
I am implemented function from this PR ... [https://github.com/sandeepmistry/arduino-LoRa/pull/574](https://github.com/sandeepmistry/arduino-LoRa/pull/574) and work beautiful. It is logical ..."if receiving something = somebody transmitting" CAD is is almost useless, this status bit is...
Thanks! Amazing, this function I searching 2years, is much better and simpler than CAD