Balachandra Bhat comments

Results 17 comments of


                                            Balachandra Bhat

How to connect M10 ublox GPS using UART ?

Hey @EnzoGhisoni Are you still experiencing this issue, or have you been able to find a solution?

Add webpack loader for images

I am trying to load a PNG file in my custom extension. Is there any fix for this issue? edit: above mentioned answer by @rgov solved the issue for me.

thermal_zone collector stuck on Jetson Orin Nano

This issue arises because thermal zones 2, 3, and 4 are offline on the Jetson Orin Nano. - CV0 (zone 2) and CV1 (zone 3) correspond to the DLA0 and...

Any plans to build packages?

@DeedleFake I’ve set up a Snap package and would be happy to maintain its build going forward. This should be especially helpful for Ubuntu users, as well as anyone else...

INF: txbuf alloc

Hi @bretwitt, The issue you’re experiencing is due to the TX buffer being full. The F9P module is unable to transmit all the data because of the limitations of the...

Getting the error terminate called after throwing an instance of 'std::runtime_error' what(): Could not configure serial baud rate

Hi @RaccoonAD Could you share your config file?

Getting the error terminate called after throwing an instance of 'std::runtime_error' what(): Could not configure serial baud rate

Try setting the `tmode3` as per your usecase. For more details check this [section](https://github.com/KumarRobotics/ublox#for-hpg-reference-devices) in ReadMe or check this [msg](https://github.com/KumarRobotics/ublox/blob/master/ublox_msgs/msg/CfgTMODE3.msg). For now, run it with tmode3 set to 0 and...

Getting the error terminate called after throwing an instance of 'std::runtime_error' what(): Could not configure serial baud rate

@RaccoonAD does everything work fine with ucenter/ucenter-2?

Getting the error terminate called after throwing an instance of 'std::runtime_error' what(): Could not configure serial baud rate

Which version of ROS are you using? > But if I use screen on ttyusb0 everythings seems fine. So you are receiving UBX-MON-VER msg when you run `screen`? MON-VER msg...

Getting the error terminate called after throwing an instance of 'std::runtime_error' what(): Could not configure serial baud rate

As ROS Kinetic is already end of life, there could be many issues with this driver on that version as it is no longer tested on it. I suggest moving...