Pablo Montoreano

Well, the Matek sensors are working (despite a misplaced decimal point which can be fixed by changing **Precision**). I guess this is the same functionality used by the Pixhawk FC...

 This is my Polaris plane. According to FrSky's stabilizer calibration, my SR8 receiver is pointing backwards (and it won't accept 180° inverted calibration). Is there a way to change...

> I don't think you can use the stabilisation when installed in a non supported way, or at the very least you should be very cautious before first flight What...

> Does "hoizontal reverse" for the mounting type not fix that? I was totally inmersed it the telemetry issue. You are right, I didn't even try to program stabilization and...

> Not supported - orientation not supported by the receivers stabilisation firmware. Yes it is, you can always invert the way the surfaces move if they are going the wrong...

Well, my SR8 has pins on both ends, so, while calibrating I actually have no idea how to point it when it says "put the pins up"... which pins LOL?...

The SR receivers work ok with the pins pointed to the back. Now I wonder if iNav's horizon would be wrong if the receiver was pointed to the front... iNav...

> I've never tried to 'miscalibrate' the SR10+ to see if you can flip its orientation front to back... 🤔 I did. Doesn't work, it keeps waiting for you to...

> Just played with the iNav Lua and SR10+ a little more... something seems off... the sign corrected telemetry seems to be working better than the prior non-signed values, but...

> there should be a config screen... don't ask me how you access it on the X9 Lite S though 😆 Right, I pressed all the butons, couldn't activate it......