biohead

I've had it powered up and connected for about 24 hours now, and so far dmesg is looking ok. I have configured NUT to talk to the UPS, and setup...

Yes, it's got nothing but the name reported, everything else is "Not Supported". I was hoping it would keep enough traffic for the purpose of testing. If the driver would...

I've been running it like this, and not so much a sniff of any USB disconnections so I think it's good to continue. What would be the best way to...

Here is a first run at some outputs. Ambient temp is around 20C I'm UK - so nominal 240V/50Hz - NOT 120V. This unit has no LCD, so can't check...

I think I've had a good go at compiling, but when I try to start the driver I'm getting this error in the debug output: ``` 0.000000 [D5] send_to_all: SETINFO...

Looking good so far. Values displayed so far look as expected. ``` root@proxmox2:/tmp/nut# upsc tripp@localhost Init SSL without certificate database battery.test.status: Battery OK battery.voltage: 40.80 battery.voltage.nominal: 36 device.mfr: Tripp Lite...

When putting everything together, and using the NUT cgistats as the visualising mechanism, the only things missing now is the battery % and output (VAC). Runtime is also missing, but...

Driver: 2.8.1-406-g49d4a5ed7 - looks as expected! (Actively on battery operation to monitor the %age)