Berk Akinci

I also have the same lines at the same time. Mine is for two different brand touch screens. E.g: ``` URB transfer type: Unknown (0xff) [Expert Info (Error/Malformed): USBPcap did...

I believe this and #113 are exact duplicates. The URB Function apparently not handled are the same: "0x002a" I was initially discounting these as "empty" packets. Now I'm thinking the...

When I get back in the lab, I'll try to get you a real hardware capture to go along with a pcap for these. It'll be captured on a Totalphase...

> Thanks. However, the raw packet capture without corresponding URB information is of limited use. Basically what you should observe on the bus is request for string descriptor 0xEE. The...

> I forgot that you're not capturing the URB at all in these cases. Is there any way for me to get USBPcap to dump out the raw URB so...

> compiling modified driver yourself. Hah! That's not going to happen. I don't have the toolchain for that, and little interest in setting it up. I _use_ Windows, but stay...

If you haven't discovered it already, try: `"config": { "skin": "narrow" }` This was good enough for me. This also leads me to a workaround: customize a skin.

I was going to suggest the same thing. I tinkered for a few minutes, but CSS position:sticky doesn't work in SVG. This looks like either 1) an overhaul of the...

I don't know the implementation details for the fix. I just thought a (configurable?) timeout would be a good idea. It's especially bad since the bad code is loaded on...

What is the recovery procedure for the Winx64 binary? Going back to use it, I found that I still had it in this state: crashing on launch. I hadn't noticed...