benbecke
benbecke
i had a impementation before just using the pubsubclient lib. There i didn´t get this error :-/ But i had problems in handling the wifi therefore i switched to this...
ok i did that before but its not showing the broker connection stuff. Only the publish and subscribe messages. Somehow i have to find out what is wrong in the...
So interesting. The issue occurs for many hours and then suddenly stops. Then MQTT is perfectly working... After some time issue again and after some time suddenly stops...
What is the status on that ? @sgtJohnny did you get this implemented ?
@sgtJohnny : I would be real thankful for an example. In the meantime i will try to understand the specifications around 15693..... To the others : thank you for the...
Thank you very much. I did some tests. Code seems to be ok but always ending up in a Soft WDT Reset @ while loop checking both irq1_value and irq0_value...
I use esp8266 and clrc663 over spi. Values always are : Inventory[2]: 13 Inventory[3]: 32 irq0_value: 13 irq1_value: 32 So interesting after reflashing mcu reset seems to be gone but...
Something new on that topic ? i have the same issue even when this is the one and only client connected to the broker. Also tried delay, and the connection...