Bernd Giesecke
Bernd Giesecke
Any news on this? Using 1.8.1 and having the same problem **`Device got disconnected before service discovery finished`** on a Huawei MediaTab M5 (Android 8.0), a Samssung Galaxy J6 Core...
@sivapraka Maybe similar issue and my solution: #173
I got it to work with both DMP FiFo AND mag values by initializing like this: ```cpp if (imu.begin() != INV_SUCCESS) { while (1) { Serial.println("Unable to communicate with MPU-9250");...
Weird. My above solution worked perfectly with a nRF52832 Feather board and a ESP32 Feather board, but fails on my custom board with an Insight ISP4520 (Nordic nRF52832 + Semtech...
You need to edit the Makefile and change the lines 39 and 40 to match the path to your GNU tools. For me they look like: ``` PROGFILES = B:/DevTools...
This is a very bad idea. AS923 requires that during join only channel 0 and 1 are used. The LoRaWAN server has to enable the other 6 channels and send...
Yes, it can connect if I avoid characters % or °.
Theoretically it should work, but I never got it to work on the LoRaWAN server side. I tested with my [WisBlock-Sensor-For-LoRaWAN]() code. What you need is the Multicast credentials: ```...
Giving up on multicast. Cannot setup the server to test anything.
Hi @promistrio From the initial log it looks like the SPI configuration is correct, the SX1262 is found and initialized, but then it seems the RX timeout IRQ is not...