Brad Morgan
Brad Morgan
I believe Python 3 support is needed here because official Python 2 support has ended. If it is possible, my suggestion would be to add Python 3 as a separate...
+1 for a release!
I like the idea of showing it but grayed out but if you do show it under the 'Use OctoPrint Settings', it should reflect the state of the OctoPrint setting.
If I uncheck 'Use OctoPrint Settings' then there are two checkboxes, one for 'Use OctoPrint Settings' and one for 'G90/G91 Influence Extruder'. I think the following will work. - Instead...
In addition, this issue also serves as a test to see if this plugin has been abandoned. Alternatively, would you like to put this plugin up for adoption?
Doesn't Extract values of hatched/born baby require that the baby has been loaded into the library? If so, then that isn't what I had in mind. I normally don't extract...
I'd like this option as well.
I would like to see this implemented as well. In addition, a notes field would be useful. I was going to ask about using the MAC address (which I'd put...
Unless I can figure out how to name the plugs, each plug's name is the model name of the plug, i.e. HS105, HS103, and HS300 so while I tried the...
I did some research and changing the hostname of a plug doesn't appear to be possible. Issue #76 appears to be the best option. Alternatively, adding a "note" field to...