awsjgy issues

Results 20 issues of


                                            awsjgy

Tsumego frame fails in some cases

I saw in lizzieyzy's open source project that you have been involved in helping with dead-end problems. But in the actual solution of dead-live problems, found some problems For example,...

Loading the latest 28b engine failed with 8 4090 cards

![image](https://github.com/lightvector/KataGo/assets/59596750/f5826454-a758-4dc6-b66d-8e7a30311917) ![image](https://github.com/lightvector/KataGo/assets/59596750/9e3a76c6-a0d4-4877-ae46-89b749446816)

Please tell me how much stronger 18b is than 40b

Please tell me how to load 40b weights with the latest katago engine 1.14 and load 40b weights with engine 1.13. Is there any difference between chess strength or chess?

Have you tested 40b What is the corresponding human chess power with different amounts of calculation, on the 19-way and 11-way chessboards

1.14 What are the new configuration parameters that can be set between the engine and the previous engine?

The latest version of tensorrt can't be loaded successfully, can 28b be sent in advance, I want to test

Why can't the katago engine set the 355 mesh and how to solve this problem?

Why is katago on an 11 way board, where the thread count only goes up to 60 max, and then it doesn't analyze when it's cranked up further

I don't really understand the point of your new 9-way ai release.

It's all down the 19 now, so what's the point of you releasing the 9 engine, please?